NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA ICS 6
(1993; R 2001) Industrial Control and
Systems: Enclosures
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
U.S. DEPARTMENT OF DEFENSE (DOD)
MIL-F-15733
(Rev H; Supp 1) Filters and Capacitors,
Radio Frequency Interference
MIL-STD-202
(Rev G; Notice 1) Electronic and
Electrical Component Parts
MIL-STD-220
(Rev B) Method of Insertion-Loss
Measurement
UNDERWRITERS LABORATORIES (UL)
UL 1283
(1998; Rev thru Feb 2004) Electromagnetic
Interference Filters
UL 486A-486B
(2003; Rev thru Apr 2004) Wire Connectors
1.2
RELATED REQUIREMENTS
Section 16050N BASIC ELECTRICAL MATERIALS AND METHODS, applies to this
section, with the additions and modifications specified herein.
1.3
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
SECTION 16280N
Page 4
Previous Page
