3.4
TRAINING
Submit a training course schedule, syllabus, and training materials 14 days
prior to the start of training. Obtain approval of the training course
before beginning that phase of training. Furnish a qualified instructor to
conduct training courses for designated personnel in the maintenance and
operation of the HVAC and DDC system. Orient training to the specific
system being installed under this contract. Use operation and maintenance
manual as the primary instructional aid in contractor provided activity
personnel training. Base training on the Operations and Maintenance
manuals and a DDC training manual. Manuals shall be delivered for each
trainee with two additional sets delivered for archiving at the project
site. Training manuals shall include an agenda, defined objectives and a
detailed description of the subject matter for each lesson. Furnish
audio-visual equipment and all other training materials and supplies. A
training day is defined as 8 hours of classroom or lab instruction,
including two 15 minute breaks and excluding lunch time, Monday through
Friday, during the daytime shift in effect at the training facility. For
guidance, the Contractor should assume the attendees will have a high
school education and are familiar with HVAC systems.
3.4.1
DDC Training Phase I
The first class shall be taught for a period of [2] consecutive training
days at least 2 weeks prior to the scheduled Performance Verification Test.
The first course shall be taught in a government provided facility on
base. Training shall be classroom, but have hands-on operation of similar
digital controllers. A maximum of [5] [_____] personnel will attend this
course. Upon completion of this course, each student should be able to
perform elementary operations and describe the general hardware
architecture and functionality of the system. This course shall include
but not be limited to:
a.
Theory of operation
b.
Hardware architecture
c.
Operation of the system
d.
Operator commands
e.
Control sequence programming
f.
Data base entry
g.
Reports and logs
h.
Alarm reports
i.
Diagnostics
3.4.2
DDC Training Phase II
The second course shall be taught in the field, using the operating
equipment at the project site[s] for a total of 2 consecutive days. A
maximum of [5] [_____] personnel will attend the course. The course shall
consist of hands-on training under the constant monitoring of the
instructor. Course content should duplicate DDC Training Phase I course as
applied to the installed system. The instructor shall determine password
SECTION 15910N
Page 63