PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL(AMCA)
AMCA 500-D
(1998) Laboratory Methods of Testing
Dampers for Rating
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI C12.10
(1997) Watthour Meters
ANSI C57.13
(1993) IEEE Standard Requirements for
Instrument Transformers
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE Gdln3
(1996) Reducing Emission of Halogenated
Refrigerants in Refrigeration and
Air-Conditioning Equipment and Systems
ASME INTERNATIONAL (ASME)
ASME B16.18
(2002) Cast Copper Alloy Solder Joint
Pressure Fittings
ASME B16.22
(2002) Wrought Copper and Copper Alloy
Solder Joint Pressure Fittings
ASME B16.26
(1988) Cast Copper Alloy Fittings for
Flared Copper Tubes
ASME B16.34
(1996) Valves Flanged, Threaded, and
Welding End
ASME B16.5
(2003) Pipe Flanges and Flanged Fittings
ASME B31.1
(2004) Power Piping
ASME B40.1
(1991) Gauges - Pressure Indicating Dial
Type - Elastic Element
ASME BPVC SEC VIII
(2001) Boiler and Pressure Vessel Codes:
Section VIII Rules for Construction of
SECTION 15910N
Page 9
Previous Page
