foundation bolts prior to concrete foundation construction for
equipment indicated or required to have concrete foundations.
(6) Details of supports, if other than those indicated,
including loadings and type of frames, brackets, stanchions, or
other supports.
(7) Automatic temperature control diagrams and control
sequences.
(8) Installation details which include the amount of factory
set superheat and corresponding refrigerant pressure/temperature.
1.5.3
Spare Parts
The Contractor shall submit spare parts data for each different item of
equipment specified, after approval of detail drawings and not later than
[_____] months prior to the date of beneficial occupancy. The data shall
include a complete list of parts and supplies, with current unit prices and
source of supply, a recommended spare parts list for 1 year of operation,
and a list of the parts recommended by the manufacturer to be replaced on a
routine basis
1.5.4
Service Organizations
The Contractor shall submit a certified list of qualified permanent service
organizations, including their addresses and qualifications, for support of
the specified equipment . The service organizations shall be reasonably
convenient to the equipment installation and be able to render satisfactory
service to the equipment on a regular and emergency basis during the
warranty period of the contract.
1.6
OPERATION AND MAINTENANCE MANUALS
1.6.1
Operation Manual
[Six] [_____] complete copies of an operation manual in bound 216 x 279 mm
8-1/2 x 11 inch booklets listing step-by-step procedures required for
system startup, operation, and shutdown shall be provided. The booklets
shall include the manufacturer's name, model number, parts list, and a
brief description of all equipment and their basic operating features.
1.6.2
Maintenance Manual
[Six] [_____] complete copies of maintenance manual in bound 216 x 279 mm
8-1/2 x 11 inch booklets listing routine maintenance procedures, possible
breakdowns and repairs, and a trouble shooting guide shall be provided.
The manuals shall include piping and equipment layouts and simplified
wiring and control diagrams of the system as installed.
PART 2
PRODUCTS
**************************************************************************
NOTE: Projects which include vapor-compression type
refrigeration systems will comply with the safety
standards defined in ASHRAE 15. Designers will be
responsible for thoroughly researching and
implementing the ASHRAE 15 safety requirements. For
refrigerant-containing parts (excluding piping)
SECTION 15652A
Page 13
Previous Page
