with other types of safety devices. Safety devices shall be installed so
that proper operation of equipment is not impaired. Welding and cutting
safety requirements shall be in accordance with AWS Z49.1. [[Catwalk,]
[ladder,] [and guardrail] shall be provided where indicated and in
accordance with Section 05500A MISCELLANEOUS METAL.]
1.4
DELIVERY, STORAGE, AND HANDLING
Stored items shall be protected from the weather, humidity and temperature
variations, dirt and dust, or other contaminants. Proper protection and
care of all material both before and during installation shall be the
Contractor's responsibility. Any materials found to be damaged shall be
replaced at the Contractor's expense. During installation, piping and
similar openings shall be capped to keep out dirt and other foreign matter.
1.5
PROJECT/SITE CONDITIONS
1.5.1
Verification of Dimensions
The Contractor shall become familiar with all details of the work, verify
all dimensions in the field, and advise the Contracting Officer of any
discrepancy before performing any work.
1.5.2
Drawings
Because of the small scale of the drawings, it is not possible to indicate
all offsets, fittings, and accessories that may be required. The
Contractor shall carefully investigate the plumbing, fire protection,
electrical, structural and finish conditions that would affect the work to
be performed and shall arrange such work accordingly, furnishing required
offsets, fittings, and accessories to meet such conditions.
1.5.3
Spare Parts
The Contractor shall submit spare parts data for each different item of
equipment, after approval of detail drawings and not later than [_____]
months prior to the date of beneficial occupancy. The data shall include a
complete list of parts and supplies, with current unit prices and source of
supply, a recommended spare parts list for 1 year of operation, and a list
of the parts recommended by the manufacturer to be replaced on a routine
basis.
PART 2
PRODUCTS
2.1
STANDARD COMMERCIAL PRODUCTS
Materials and equipment shall be standard products of a manufacturer
regularly engaged in the manufacturing of such products, which are of a
similar material, design and workmanship. The standard products shall have
been in satisfactory commercial or industrial use for 2 years prior to bid
opening. The 2 year use shall include applications of equipment and
materials under similar circumstances and of similar size. The 2 years
experience shall be satisfactorily completed by a product which has been
sold or is offered for sale on the commercial market through
advertisements, manufacturer's catalogs, or brochures. Products having
less than a 2 year field service record shall be acceptable if a certified
record of satisfactory field operation, for not less than 6000 hours
exclusive of the manufacturer's factory tests, can be shown. Products
shall be supported by a service organization. System components shall be
SECTION 15645A
Page 8
Previous Page
