with the following requirements:
a.
Type I, Induced Mechanical Draft.
b.
Constructed of [zinc-coated steel] [stainless steel] [wood]
[fiberglass-reinforced plastic]. No asbestos-cement materials
will be permitted.
c.
Hardware shall be [cadmium plated] [zinc-coated] [stainless steel]
except nails shall be [silicon bronze] [commercial bronze]
[stainless steel].
d.
Vibration cutout switch shall be provided and interlocked with the
fan motor.
e.
Fill or contact surfaces shall be [polyvinyl chloride (PVC) formed
sheets] [zinc-coated steel] [wood]. No plasticized cellulose
materials will be permitted.
f.
Field performance test is not required.
[g.
Fifteen-percent increase in design structural loading shall be
included for ice or snow load.]
[h.
Air inlet and discharge terminations shall have flanged or lipped
[i.
Fan motor shall be 2-speed.]
2.7.5
Induced-draft, counterflow or crossflow type, and either spray-filled or
wetted-surface type. Field-assembled towers shall include those where a
majority of assembly work is done at the project location.
2.7.5.1
Sound Power Levels
**************************************************************************
NOTE: Choose one of the following options.
**************************************************************************
**************************************************************************
NOTE: Specify sound power levels after considering
location and application of cooling tower. Delete
first paragraph if project includes Section 15070,
"Mechanical Sound, Vibration, and Seismic Control."
Delete second paragraph if project does not include
Section 15070, "Mechanical Sound, Vibration, and
Seismic Control."
**************************************************************************
[Sound power levels (in decibels with a reference pressure of 0.0002
microbar) of the cooling tower shall not exceed the maximum permitted
decibel levels for the designated octave band as set forth in the following
tables. Base the sound power level data for the cooling tower on tests
conducted in accordance with ANSI S1.13.
Octave Band
(in Hz)
63
125
250
500
1000
2000
4000
8000
SECTION 15601N
Page 31