starters and pushbutton stations.]
2.3
STOKER EQUIPMENT
The boiler manufacturer shall certify that the stoker selected will be
satisfactory for the boiler design. Stokers shall be capable of
efficiently burning coal with fuel sizing conforming to ABMA Boiler 203,
approximately [_____] mm inches in size with an approximate moisture
content of [_____] percent and having the following analyses:
Proximate Analysis
Percent, Dry
Moisture
[_____]
Volatile matter
[_____]
Fixed carbon
[_____]
Ash
[_____]
Ultimate
Analysis
Percent, Dry
Carbon
[_____]
[_____]
Nitrogen (Calc)
[_____]
Sulfur
[_____]
Chlorine
[_____]
Ash
[_____]
Oxygen (Diff)
[_____]
Btu/lb as received
[_____]
Btu/lb - dry
[_____]
Grindability
[_____]
Raw Fuel Size
[_____]
Ash Analysis
Percent
SiO(2)
[_____]
Al(2)O(3)
[_____]
TiO(2)
[_____]
Fe(2)O(3)
[_____]
CaO
[_____]
MgO
[_____]
Na(2)O
[_____]
K(2)O
[_____]
SO(3)
[_____]
Ash Fusion Temperatures
Degrees C
Initial deformation temperature
[_____]
Softening temperature
[_____]
Fluid temperature
[_____]
Ash Fusion Temperatures
degrees F
Initial deformation temperature
[_____]
Softening temperature
[_____]
Fluid temperature
[_____]
2.3.1
Spreader Stokers
**************************************************************************
NOTE: Any paragraphs describing stoker equipment
SECTION 15559A
Page 28
Previous Page
