2. Location, size, and capacity of finned tube
radiators, convectors, unit heaters, flow meters,
pumps, and expansion tanks.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI B16.18
(1984; R 1994) Cast Copper Alloy Solder
Joint Pressure Fittings
ANSI B16.24
(1991; Errata 1991) Cast Copper Alloy Pipe
Flanges and Flanged Fittings Class 150,
300, 400, 600, 900, 1500, and 2500
ANSI S1.4
(1983; R 2001) Sound Level Meters (ASA 47)
AMERICAN SOCIETY OF SANITARY ENGINEERING (ASSE)
ASSE 1003
(2001) Water Pressure Reducing Valves
ASSE 1017
(2003) Temperature Actuated Mixing Valves
for Hot Water Distribution Systems
AMERICAN WELDING SOCIETY (AWS)
AWS Z49.1
(1999) Safety in Welding, Cutting and
Allied Processes
ASME INTERNATIONAL (ASME)
ASME B1.1
(2001; R 2003) Unified Inch Screw Threads
(UN and UNR Thread Form)
ASME B1.20.1
(1983; R 2001) Pipe Threads, General
Purpose, Inch
ASME B16.1
(1998) Cast Iron Pipe Flanges and Flanged
Fittings
ASME B16.11
(2002) Forged Fittings, Socket-Welding and
Threaded
SECTION 15185N
Page 5
Previous Page
