For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are for [Contractor Quality Control
approval.] [information only. When used, a designation following the "G"
designation identifies the office that will review the submittal for the
Government.] The following shall be submitted in accordance with Section
01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Coupling and Bracing.
Flexible Couplings or Joints.
Equipment Requirements.
Contractor Designed Bracing[; G][; G, [_____]].
Detail drawings along with catalog cuts, templates, and erection
and installation details, as appropriate, for the items listed.
Submittals shall be complete in detail; shall indicate thickness,
type, grade, class of metal, and dimensions; and shall show
construction details, reinforcement, anchorage, and installation
with relation to the building construction.
SD-03 Product Data
Coupling and Bracing[; G][; G, [_____]].
Equipment Requirements[; G][; G, [_____]].
Copies of the design calculations with the detail drawings.
Calculations shall be stamped by a registered engineer and shall
verify the capability of structural members to which bracing is
attached for carrying the load from the brace.
Contractor Designed Bracing[; G][; G, [_____]].
Copies of the design calculations with the drawings.
Calculations shall be approved, certified, stamped and signed by a
registered Professional Engineer. Calculations shall verify the
capability of structural members to which bracing is attached for
carrying the load from the brace.
SECTION 15070A
Page 9
Previous Page
