Treated, 830 Mpa Minimum Tensile Strength
(Metric)
ASTM A 490
(2004a) Structural Bolts, Alloy Steel,
Heat Treated, 150 ksi Minimum Tensile
Strength
ASTM A 490M
(2004a) High-Strength Steel Bolts, Classes
10.9 and 10.9.3, for Structural Steel
Joints (Metric)
ASTM A 668/A 668M
(2004) Steel Forgings, Carbon and Alloy,
for General Industrial Use
ASTM B 438/B 438M
(2004) Sintered Bronze Bearings (Oil
Impregnated)
ASTM B 439
(2000e1) Iron-Base Sintered Bearings
(Oil-Impregnated)
ASTM B 612
(2000) Iron Bronze Sintered Bearings
(Oil-Impregnated)
ASTM B 633
(1998e1) Electrodeposited Coatings of Zinc
on Iron and Steel
ASTM E 125
(1963; R 2003) Photographs for Magnetic
Particle Indications on Ferrous Castings
CRANE MANUFACTURERS ASSOCIATION OF AMERICA (CMAA)
CMAA 70
(2004) EnviroTop Running and Bridge and
Gantry Type Multiple Girder Electric
Overhead Traveling Cranes, No. 70
CMAA 74
(2004) Top Running and Under Running
Single Girder Electric Overhead Cranes
Utilizing Under Running Trolley Hoist, No.
74
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA ICS 2
(2000; R
2004) Industrial Controls and
Systems:
Controllers, Contactors, and
Overload
Relays Rated Not More than 2000
Volts AC
or 750 Volts DC
NEMA ICS 6
(1993; R 2001) Industrial Control and
Systems: Enclosures
NEMA MG 1
(2003; R 2004) Motors and Generators
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
UNDERWRITERS LABORATORIES (UL)
UL 1004
(1994; Rev thru Feb 2001) Electric Motors
SECTION 14630A
Page 8
Previous Page
