TABLE I
HALON 1301 DATA (EACH ROOM & UNDER FLOOR)
Date:____________
Room Description ___________________________________________________________
Dimensions (m) Length _______________ Height ______________ Width __________
Area ______________ Sq Meters
Volume ________________________________
Ventilation Rate into Room ____________ Cubic Meter per Second
Specific Volume At Design Temp. ____________________________________________
Design Temp. ______________ Deg C
Max. Temp Expected ______________ Deg C
Percent Design Concentration _________ kg
1301 Required ______________
Number of Nozzles ______________
Sq Meter/Nozzle___________________
Kg 1301 to be Supplied/Nozzle ____________(Based on no air flow)
Discharge Time _________________________
Concentration at Design Temperature ______________________ percent
Concentration at Max Temperature ___________________________ percent
Concentration
Point A
Point B
Point C
0 Seconds after end of Discharge percent C __________ __________
__________
5 Seconds after end of Discharge percent C __________ __________
__________
10 Seconds after end of Discharge percent C __________ __________
__________
15 Seconds after end of Discharge percent C __________ __________
__________
20 Seconds after end of Discharge percent C __________ __________
__________
25 Seconds after end of Discharge percent C __________ __________
__________
30 Seconds after end of Discharge percent C __________ __________
__________
40 Seconds after end of Discharge percent C __________ __________
__________
50 Seconds after end of Discharge percent C __________ __________
__________
60 Seconds after end of Discharge percent C __________ __________
__________
120 Seconds after end of Discharge percent C __________ __________
__________
Agent Tanks to be Supplied for test use ________________________kg Each
Free Venting Requirements
___________ kg/sq meter allowable strength
this requires
___________ sq mm free venting area
TABLE I
HALON 1301 DATA (EACH ROOM & UNDER FLOOR)
Date:____________
Room Description ___________________________________________________________
Dimensions (Ft) Length ______________ Height ______________ Width __________
Area ______________ Sq Ft
Volume ________________________________
Ventilation Rate into Room ____________ Cubic Feet per Minute
Specific Volume At Design Temp. ____________________________________________
Design Temp. ______________ Deg F
Max. Temp Expected ______________ Deg F
SECTION 13966N
Page 24
Previous Page
