Connection of equipment shall be indicated by
circuit runs and not conduit runs. Do not indicate
number and size of conductors for interconnection of
fire alarm components.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN WATER WORKS ASSOCIATION(AWWA)
AWWA C500
(2002; A C500a-95) Metal-Seated Gate
Valves for Water Supply Service
AWWA C651
(1999) Disinfecting Water Mains
ASTM INTERNATIONAL (ASTM)
ASTM A 53
(1999b) Pipe, Steel, Black and Hot-Dipped,
Zinc-Coated, Welded and Seamless
FM GLOBAL (FM)
FM P7825
(2003) Approval Guide
FOUNDATION FOR CROSS-CONNECTION CONTROL AND HYDRAULIC RESEARCH
(FCCCHR)
FCCCHR List
(continuously updated) List of Approved
Backflow Prevention Assemblies
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 11
(2005) Low-, Medium- and High- Expansion
Foam Systems
NFPA 13
(2002) Installation of Sprinkler Systems
NFPA 14
(2003) Installation of Standpipe, Private
Hydrants and Hose Systems
NFPA 15
(2001) Water Spray Fixed Systems for Fire
Protection
NFPA 16
(2003) Installation of Foam-Water
SECTION 13956N
Page 6
Previous Page
