AWWA B301
(2004) Liquid Chlorine
AWWA C104
(1995) Cement-Mortar Lining for
Ductile-Iron Pipe and Fittings for Water
AWWA C110
(1998) Ductile-Iron and Gray-Iron
Fittings, 3 In. Through 48 In. (76 mm
through 1219 mm), for Water
AWWA C111
(2000) Rubber-Gasket Joints for
Ductile-Iron Pressure Pipe and Fittings
AWWA C151
(2002) Ductile-Iron Pipe, Centrifugally
Cast, for Water
AWWA C203
(2002; A C203a-99) Coal-Tar Protective
Coatings and Linings for Steel Water
Pipelines - Enamel and Tape - Hot-Applied
AWWA C651
(1999) Disinfecting Water Mains
AWWA C652
(2002) Disinfection of Water-Storage
Facilities
AWWA EWW
(1998) Standard Methods for the
Examination of Water and Wastewater
ASME INTERNATIONAL (ASME)
ASME B16.1
(1998) Cast Iron Pipe Flanges and Flanged
Fittings
ASME B16.11
(2002) Forged Fittings, Socket-Welding and
Threaded
ASME B16.21
(1992) Nonmetallic Flat Gaskets for Pipe
Flanges
ASME B16.9
(2003) Factory-Made Wrought Steel
Buttwelding Fittings
ASME B18.2.1
(1996) Square and Hex Bolts and Screws,
Inch Series
ASME B18.2.2
(1987; R 1999) Square and Hex Nuts
ASTM INTERNATIONAL (ASTM)
ASTM A 135
(2001) Electric-Resistance-Welded Steel
Pipe
ASTM A 183
(2003) Carbon Steel Track Bolts and Nuts
ASTM A 193/A 193M
(2004c) Alloy-Steel and Stainless Steel
Bolting Materials for High-Temperature
Service
ASTM A 449
(2004a) Quenched and Tempered Steel Bolts
and Studs
SECTION 13945A
Page 7
Previous Page
