1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI INCITS 154
(1988; R 1999) Office Machines and
Supplies - Alphanumeric Machines-Keyboard
Arrangement
ANSI X9.52
(1998) Triple Data Encryption Alogarithm
Modes of Operation
ASTM INTERNATIONAL (ASTM)
ASTM E 84
(2004) Surface Burning Characteristics of
Building Materials
ELECTRONIC INDUSTRIES ALLIANCE (EIA)
EIA 170
(1957) Electrical Performance Standards -
Monochrome Television Studio Facilities
EIA ANSI/EIA-310-D
(1992) Racks, Panels, and Associated
Equipment
EIA ANSI/EIA/TIA-232-F
(2002) Interface Between Data Terminal
Equipment and Data Circuit-Terminating
Equipment Employing Serial Binary Data
Interchange
EIA ANSI/TIA/EIA-568-A
(1995; Addendum 3 1998) Commercial
Building Telecommunications Cabling
Standard - 3 Parts
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE C2
(2002) National Electrical Safety Code
IEEE C62.41
(1991; R 1995) Recommended Practice for
Surge Voltages in Low-Voltage AC Power
Circuits
IEEE Std 142
(1992) Recommended Practice for Grounding
of Industrial and Commercial Power Systems
- Green Book
SECTION 13720A
Page 9
Previous Page
