to top and bottom headers of solar-collector panel.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI B16.24
(1991; Errata 1991) Cast Copper Alloy Pipe
Flanges and Flanged Fittings Class 150,
300, 400, 600, 900, 1500, and 2500
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE 90.1
(2001; various Errata) Energy Standard for
Buildings Except Low-Rise Residential
Buildings
ASHRAE 93
(2003) Methods of Testing to Determine the
Thermal Performance of Solar Collectors
ASHRAE 96
(1980; R 1989) Methods of Testing to
Determine the Thermal Performance of
Unglazed Flat-Plate Liquid-Type Solar
Collectors
AMERICAN SOCIETY OF SANITARY ENGINEERING (ASSE)
ASSE 1003
(2001) Water Pressure Reducing Valves
AMERICAN WELDING SOCIETY (AWS)
AWS A5.8
(1992) Filler Metals for Brazing and Braze
Welding
ASME INTERNATIONAL (ASME)
ASME B16.22
(2002) Wrought Copper and Copper Alloy
Solder Joint Pressure Fittings
ASME B16.39
(1998) Malleable Iron Threaded Pipe Unions
ASME B31.1
(2004) Power Piping
SECTION 13610N
Page 5
Previous Page
