b.
Preformed.
c.
Factory-insulated to provide weathertight joint upon installation,
with:
[(1) Inner and outer sheets formed and joined at edges into a
tongue-and-groove joining system with vinyl seals, closed cell
foam tape, or factory-applied nonskinning butyl sealant] [; or]
[(2) Outer sheet designed to overlap adjacent panel a minimum of
one configuration.]
d.
If designed as diaphragm, roof decks shall be designed in
accordance with SDI DDM02.
e.
For standing seam roofs, Section 07611N STEEL STANDING SEAM
ROOFING.
[Depth of the panels shall be as indicated.] [Insulation in the cores of
the panels shall be asbestos-free composition and provide an overall "U"
value of not more than 0.10 for wall panels [and] [0.05 for roof panels].]
[Insulation in factory-insulated panels shall have a flame spread rating of
75 or less and a smoke development factor of 150 or less]. [Panels over 30
feet in length shall be designed for thermal expansion and contraction.]
2.1.2.1
Zinc-Coated Steel Sheet
ASTM A 755/A 755M, Coating Class Z 350 G-90 or ASTM A 653/A 653M, SQ, Grade
33, Coating Class Z 350 G-90.
2.1.2.2
Aluminum/Zinc-Coated Steel Sheet
ASTM A 792/A 792M, AZ 55
2.1.2.3
Aluminum Sheet
Alloy 3004 Alclad conforming to ASTM B 209M ASTM B 209.
2.1.2.4
Aluminum-coated Steel
ASTM A 463/A 463M, Type Z, coating designation T2 ES; or aluminum-coated
steel conforming to ASTM A 463/A 463M, Type 2, coating designation T2 E5.
2.1.3
Wall Liners
**************************************************************************
NOTE: Wall liners will be specified when necessary
to provide protection to the insulation and will be
the minimum height consistent with the use of the
building. When full-height liners are required,
they should be specified under this paragraph in
lieu of using factory insulated panels. Wall liners
of plywood, hardboard or other suitable materials
may be used when considered to be more appropriate
than sheet metal liners and when these materials
will meet the fire hazard classifications required
for the installation. If alternative liners are
used, omit the following paragraph and show the
SECTION 13120
Page 25
Previous Page
