2.2.1
Steel Plates, Shapes, and Bars
Steel plates, shapes, and bars shall conform to ASTM A 36/A 36M.
2.2.2
Ductile Iron Pipe
Ductile iron pipe shall conform to AWWA C151.
2.2.2.1
Flanged Ductile Iron Pipe
Flanged pipe shall conform to AWWA C115 with ASME B16.1, Class 125 flanges.
2.2.2.2
Joints
Joints for ductile iron pipe shall conform to AWWA C111.
2.2.2.3
Fittings for Ductile Iron Pipe
Fittings shall conform to AWWA C110.
2.2.3
Steel Pipe
Steel pipe shall conform to AWWA C200.
2.2.3.1
Flanged Joints
Flanged joints shall conform to AWWA C207, Class B Ring Type.
2.2.3.2
Slip Joints
Slip joints shall conform to AWWA C200.
2.2.3.3
Mechanical Joints
Mechanical joints shall conform to AWWA C200.
2.2.3.4
Welded Joints
Welded joints shall conform to AWWA C206.
2.2.3.5
Fittings for Steel Pipe
Fittings shall conform to AWWA C200 and be fabricated in compliance with
AWWA C208.
2.2.4
Galvanized Steel Pipe and Fittings
Pipe shall conform to ASTM A 53/A 53M, standard weight, galvanized. Pipe
smaller than 100 mm 4-inch diameter shall have screwed joints in accordance
with ASME B1.20.1. Fittings shall be galvanized malleable iron in
accordance with ASME B16.3. Pipe 100 mm 4-inch diameter and larger shall
have flanged joints and fittings in accordance with AWWA C207.
2.2.5
Polyvinyl Chloride (PVC) Pipe and Fittings
PVC pipe and fittings less than 100 mm 4-inch diameter shall be in
accordance with ASTM D 1785 or ASTM D 2241. PVC pipe and fittings 100 mm 4
inches in diameter and larger shall be in accordance with ASTM D 2241 or
AWWA C900 and shall have push-on joints.
SECTION 11390
Page 14
Previous Page
