Drawings as specified.
SD-03 Product Data
Materials and Equipment
A complete list of equipment and materials, including
manufacturer's descriptive data and technical literature,
performance charts and curves, catalog cuts, proposed diagrams,
installation instructions and other sheets. Spare parts data for
each different item of material and equipment specified, after
approval of the related submittals, and not later than [_____]
months prior to the date of beneficial occupancy. The data shall
include a complete list of parts and supplies, with current unit
prices and source of supply.
SD-06 Test Reports
Field Testing
Performance test reports in booklet form showing all field tests
performed to adjust each component and all field tests performed
to prove compliance with the specified performance criteria, upon
completion and testing of the installed system. Each test report
shall indicate the final position of controls.
SD-10 Operation and Maintenance Data
Operating and Maintenance Manuals[; G][; G, [_____]]
[Six] [_____] copies of operation and [six] [_____] copies of
maintenance manuals for the equipment furnished. One complete set
shall prior to performance testing and the remainder upon
acceptance. Operating manuals shall detail the step-by-step
procedures required for system startup, operation, and shutdown.
Operating manuals shall include the manufacturer's name, model
number, parts list, and brief description of all equipment and
their basic operating features. Maintenance manuals shall list
routine maintenance procedures, possible breakdowns and repairs,
and troubleshooting guides. Maintenance manuals shall include
piping and equipment layout and simplified wiring and control
diagrams of the system as installed. Manuals shall be approved
prior to the field training course.
1.3
QUALIFICATIONS
Procedures and welders shall be qualified in accordance with the code under
which the welding is specified to be accomplished.
1.4
DELIVERY AND STORAGE
All equipment delivered and placed in storage shall be stored with
protection from the weather, excessive humidity and excessive temperature
variation; and dirt, dust, or other contaminants.
1.5
FIELD MEASUREMENTS
The Contractor shall become familiar with all details of the work, verify
all dimensions in the field, and shall advise the Contracting Officer of
SECTION 11375A
Page 9
Previous Page
