**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-11035 (February 2004)
--------------------------
Preparing Activity: USACE
Superseding
UFGS-11035 (April 2000)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
Latest change indicated by CHG tags
**************************************************************************
SECTION 11035
BULLET-RESISTANT COMPONENTS
02/04
**************************************************************************
NOTE: This section covers requirements for bullet
resistant components including doors, windows,
louvers, gunports, pass drawers, deal trays, and
speaking apertures.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
SECTION 11035
Page 3
Previous Page
