AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS (ACGIH)
ACGIH 0100Doc
(2001) Documentation of the Threshold
Limit Values and Biological Exposure
Indices
ASTM INTERNATIONAL (ASTM)
ASTM D 1730
(2003) Preparation of Aluminum and
Aluminum-Alloy Surfaces for Painting
ASTM D 1731
(2003) Preparation of Hot-Dip Aluminum
Surfaces for Painting
ASTM D 3274
(1995; R 2002) Evaluating Degree of
Surface Disfigurement of Paint Films by
Microbial (Fungal or Algal) Growth or Soil
and Dirt Accumulation
ASTM D 3359
(2002) Measuring Adhesion by Tape Test
ASTM D 4214
(1998) Evaluating the Degree of Chalking
of Exterior Paint Films
THE SOCIETY FOR PROTECTIVE COATINGS (SSPC)
SSPC PA Guide 5
(2002) Guide to Maintenance Coating of
Steel Structures in Atmospheric Service
SSPC SP 1
(1982; R 2000) Solvent Cleaning
SSPC SP 10
(2000) Near-White Blast Cleaning
SSPC SP 2
(1982; R 2000) Hand Tool Cleaning
SSPC SP 3
(1982; R 2000) Power Tool Cleaning
SSPC SP 5
(2000) White Metal Blast Cleaning
SSPC SP 6
(2000) Commercial Blast Cleaning
SSPC SP 7
(2000) Brush-Off Blast Cleaning
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
SECTION 09995
Page 4
Previous Page
