2.2.10.3
Solid Surfacing Material:
[_____]
2.2.10.4
Casework:
[_____]
2.2.10.5
Signage Message Color (excluding handicapped signage):
[_____]
2.2.10.6
Signage Background Color (excluding handicapped signage):
[_____]
2.2.10.7
Operable Partitions:
[_____]
2.2.10.8
Acoustical Wall Panels:
[_____]
2.2.10.9
Corner Guards:
[_____]
2.2.10.10
Wall Switch Handles and Standard Receptacle Bodies:
[_____]
2.2.10.11
Electrical Device Cover Plates:
[_____]
2.2.10.12
Electrical Panels:
[_____]
2.2.10.13
Shower [Curtain][Doors]:
[_____]
2.2.10.14
Shower Wall Kits, Trim and Shower Pan:
[_____]
2.3
PLACEMENT SCHEDULE
**************************************************************************
NOTE: Coordinate requirement for Placement Schedule
with government.
When the placement schedule is used, create finish
color codes for each finish color and place code in
the appropriate column. Examples of codes are:
Paint Color #123 by Manufacturer ABC, Code PNT-1
Paint Color #456 by Manufacturer ABC, Code PNT-2
This code shall be the same as the Color Schedule
code for cross-referencing purposes. Example:
Paragraph 2.6.1 Interior Wall Finish, Paragraph
2.6.1.1 Paint: (PNT-1) Manufacturer ABC, Color #123
(PNT-2) Manufacturer ABC, Color #456.
Use the term "Area" in place of "Room" when the
space being defined does not consist of a single
room.
**************************************************************************
Placement of color shall be in accordance with the following schedule:
SECTION 09915
Page 14
Previous Page
