DIVISION 6:
INTERIOR WOOD PAINT TABLE
J.
Existing, previously painted Wood Doors; Pigmented finish:
1.
[Alkyd
[New; MPI RIN 6.3B-G5 (Semigloss)
Primer:
Intermediate:
Topcoat:
MPI 46
MPI 47
MPI 47
System DFT: 4.5 mils 112 microns]
[New; MPI RIN 6.3B-G6 (Gloss)
Primer:
Intermediate:
Topcoat:
MPI 46
MPI 48
MPI 48
System DFT: 4.5 mils 112 microns]
Note:
Sand between all coats per manufacturers recommendations.]
**************************************************************************
NOTE: (DIVISION 9: INTERIOR PLASTER, GYPSUM BOARD,
TEXTURED SURFACES PAINT TABLE).
(Substrate B). List other high humidity areas
requiring enamel finishes. For tile-like finishes,
filler materials, and applications, refer to Section
09963 HIGH-BUILD GLAZE COATING. These high
performance coatings are normally used to meet
exposure-resistant requirements and can be applied
to wood, metal, and concrete substrates.
**************************************************************************
DIVISION 9:
INTERIOR PLASTER, GYPSUM BOARD, TEXTURED SURFACES PAINT TABLE
A.
New [and Existing, previously painted] [Plaster] [and] [Wallboard] not
otherwise specified:
1. [Latex
[New; MPI INT 9.2A-G2 (Flat) / Existing; RIN 9.2A-G2 (Flat)
Primer:
Intermediate:
Topcoat:
MPI 50
MPI 44
MPI 44
System DFT: 4 mils 100 microns]
[New; MPI INT 9.2A-G3 (Eggshell) / Existing; RIN 9.2A-G3 (Eggshell)
Primer:
Intermediate:
Topcoat:
MPI 50
MPI 52
MPI 52
System DFT: 4 mils 100 microns]
[New; MPI INT 9.2A-G5 (Semigloss) / Existing; RIN 9.2A-G5 (Semigloss)
Primer:
Intermediate:
Topcoat:
MPI 50
MPI 54
MPI 54
System DFT: 4 mils 100 microns]]
2. [High Performance Architectural Latex - High Traffic Areas
[New; MPI INT 9.2B-G2 (Flat) / Existing; MPI RIN 9.2B-G2 (Flat)
Primer:
Intermediate:
Topcoat:
MPI 50
MPI 138
MPI 138
System DFT: 4 mils 100 microns]
SECTION 09900
Page 72
Previous Page
