The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM A 1008/A 1008M
(2004b) Steel Sheet, Cold-Rolled, Carbon,
Structural, High-Strength Low-Alloy and
High-Strength Low-Alloy with Improved
ASTM A 167
(2004) Stainless and Heat-Resisting
Strip
ASTM A 580/A 580M
(1998; R 2004) Stainless Steel Wire
ASTM A 641/A 641M
(2003) Zinc-Coated (Galvanized) Carbon
Steel Wire
ASTM A 653/A 653M
(2004a) Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM B 633
(1998e1) Electrodeposited Coatings of Zinc
on Iron and Steel
ASTM C 423
(2002a) Sound Absorption and Sound
Absorption Coefficients by the
Reverberation Room Method
ASTM C 635
(2004) Manufacture, Performance, and
Testing of Metal Suspension Systems for
Acoustical Tile and Lay-In Panel Ceilings
ASTM C 636
(2004) Installation of Metal Ceiling
Suspension Systems for Acoustical Tile and
Lay-In Panels
ASTM C 834
(2000e1) Latex Sealants
ASTM E 119
(2000a) Fire Tests of Building
Construction and Materials
ASTM E 1264
(1998) Acoustical Ceiling Products
ASTM E 1414
Rooms Sharing a Common Ceiling Plenum
ASTM E 1477
(1998a; R 2003) Luminous Reflectance
Factor of Acoustical Materials by Use of
Integrating-Sphere Reflectometers
ASTM E 580
(2002e1) Application of Ceiling Suspension
Systems for Acoustical Tile and Lay-In
Panels in Areas Requiring Moderate Seismic
Restraint
SECTION 09510
Page 5