1.
Location and extent of plastering
2.
Type(s) and spacing of supports
3.
Type(s) of plaster and location
4.
Control joint locations
5.
Fire resistance rating(s), where applicable
6. Sound transmission class (STC) rating(s), where
applicable
7. Location and size of access panels and
fabrication details for access panels larger than
600 by 900 mm 24 by 36 inches.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM C 1063
(2003) Installation of Lathing and Furring
to Receive Interior and Exterior Portland
Cement-Based Plaster
ASTM C 37
(1995) Gypsum Lath
ASTM C 841
(2003) Installation of Interior Lathing
and Furring
GYPSUM ASSOCIATION (GA)
GA 600
(2003) Fire Resistance Design Manual
UNDERWRITERS LABORATORIES (UL)
UL Fire Resist Dir
(2004) Fire Resistance Directory
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
SECTION 09205N
Page 3
Previous Page
