entitled "Window-Cleaner Anchors":
"Removable or tilting-type sash may be provided in
lieu of double-hung windows equipped with window
cleaner anchors. Sash shall be designed so that both
sides of glass can be readily cleaned from interior
without dismantling any part of window or screens.
Provide removable and tilting-type sash with
tamper-proof hardware to prevent sash removal by
unauthorized personnel."
**************************************************************************
Provide double head anchors for windows [indicated] [specified]. Anchors
shall be stainless steel of size and design required for the window type
and application. Provide two anchors for each single window [and each
adjacent fixed glass window unit]. Fasten anchors 1120 mm 44 inches above
the window sill utilizing appropriate methods for the window type and
application in accordance with industry safety standards.
2.2.8
**************************************************************************
NOTE: Specify anodic and organic coatings as
Contractor's option when these finishes are
determined to be economically competitive in the
project area, unless the project requires use of one
or the other to match an existing condition.
**************************************************************************
Exposed aluminum surfaces shall be factory finished with an [anodic
coating] [or] [organic coating]. [Color shall be [_____] [as indicated].]
All windows [for each building] shall have the same finish.
2.2.8.1
Anodic Coating
**************************************************************************
NOTE: Specify Architectural Class I for highly
corrosive industrial atmospheres where dust, gases,
salts, and other destructive elements that attack
metal exist. Specify Architectural Class II for all
atmospheric conditions not requiring Class I.
**************************************************************************
Clean exposed aluminum surfaces and provide an anodized finish conforming
to AA 45 and AAMA 611. Finish shall be:
[a.
Architectural Class II (0.01 to 0.0175 mm 0.4 mil to 0.7 mil),
designation AA-M10-C22-[A31, clear (natural)] [A32, integral
color] [A34, electrolytically deposited color] anodized.]
[b.
Architectural Class I (0.0175 mm 0.7 mil or thicker), designation
AA-M10-C22-[A41, clear (natural)] [A42, integral color] [A44,
electrolytically deposited color] anodized.]
2.2.8.2
Organic Coating
**************************************************************************
NOTE: When anodic and organic coatings are
determined to be economically competitive in the
SECTION 08520N
Page 15
Previous Page
