operators. Show method of operation and concealment
of operators, cables and rods. Show wiring diagram
for motor driven operators.
8. Locations of windows designated as forced entry
resistant.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ALUMINUM ASSOCIATION (AA)
AA 45
(2003) Designation System for Aluminum
AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)
AAMA 101
(2002) Voluntary Specifications for
Aluminum, Vinyl (PVC) and Wood Windows and
Glass Doors
AAMA 1302
(1976) Voluntary Specifications for
Forced-Entry Resistant Aluminum Prime
Windows
AAMA 1503
(1998) Voluntary Test Method for Thermal
Transmittance and Condensation Resistance
of Windows, Doors and Glazed Wall Sections
AAMA 2603
(2002) Voluntary Specification,
Performance Requirements and Test
Procedures for Pigmented Organic Coatings
on Aluminum Extrusions and Panels
AAMA 2604
(2002) Voluntary Specification,
Performance Requirements and Test
Procedures for High Performance Organic
Coatings on Aluminum Extrusions and Panels
AAMA 2605
(2002) Voluntary Specification,
Performance Requirements and Test
Procedures for Superior Performing Organic
Coatings on Aluminum Extrusions and Panels
SECTION 08520N
Page 5
Previous Page
