NOTE: Where items of hardware such as operating
mechanism for balanced doors, integral push bars,
concealed closing devices, and special panic bolts
for exceptionally narrow stile doors are designed as
an integral part of door or frame construction, it
may be necessary to revise specification so these
items are furnished as part of door and frame unit.
When accessories, such as finger guards, electric
strikes, automatic power operators, and special
thresholds are required, add as necessary.
**************************************************************************
Hardware is specified in Section 08710 DOOR HARDWARE. Deliver hardware
templates and hardware (except field-applied hardware) to the door
manufacturer for use in fabrication of aluminum doors and frames. Cut,
reinforce, drill, and tap doors and frames at the factory to receive
template hardware. Provide doors to receive surface-applied hardware,
except push plates, kick plates, and mop plates, with reinforcing only;
drill and tap in the field. Provide hardware reinforcements of stainless
steel or steel with hot-dipped galvanized finish, and secure with stainless
steel screws. [Provide reinforcement in core of flush doors as required to
receive locks, door closers, and other hardware.]
2.3.7
Provisions for Glazing
**************************************************************************
NOTE: This guide specification requires that
hardware and glazing for aluminum doors be specified
in their respective sections of the project
specification.
**************************************************************************
Provide extruded aluminum snap-in glazing beads on interior side of doors.
Provide extruded aluminum, theft-proof, snap-in glazing beads or fixed
glazing beads on exterior or security side of doors. Glazing beads shall
have vinyl insert glazing gaskets. Design glazing beads to receive glass
of thickness indicated or specified. Glazing is specified in Section 08800
GLAZING.
2.3.8
**************************************************************************
NOTE: Specify finish designation AA-M10-C22-A31,
Architectural Class II clear (natural) anodized
finish or AA-M10-C22-A32, Architectural Class II
color-anodized finish, when doors will not be
subject to excessive wear or abrasion and will be
regularly cleaned and maintained. Specify finish
designation AA-M10-C22-A41, Architectural Class I
clear (natural) anodized finish or AA-M10-C22-A42,
Architectural Class I color-anodized finish, when
doors will be subject to excessive wear and will not
be regularly cleaned and maintained. Also specify
these designations (Class I) when doors will be used
in highly corrosive industrial atmospheres where
dust, gases, salts, and other destructive elements
that attack metal are in existence. Color-anodized
finish is available in medium bronze, dark bronze,
and black. Where revolving aluminum doors and
SECTION 08120
Page 10
Previous Page
