**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-07611N (September 1999)
------------------------------
Preparing Activity: NAVFAC
Replacing without revision
NFGS of same number and date
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
**************************************************************************
SECTION 07611N
STEEL STANDING SEAM ROOFING
09/99
**************************************************************************
NOTE: This guide specification covers the
requirements for steel standing seam roofing.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
**************************************************************************
NOTE: This guide specification is primarily for
Structural Standing Seam Metal Roofing Systems
(SSMRS), i.e. Self-Supporting Systems designed to
span from purlin to purlin at slopes as low as one
in 48 1/4 inch per foot versus architectural
cladding systems that require continuous support,
secondary moisture protection and slopes no less than
one in four 3 inches per foot. Structural systems
may be used for architectural applications whereas
architectural systems cannot be used for structural
applications. If an SSMRS system is desired
primarily for architectural purposes use Section
07410N METAL ROOF AND WALL PANELS; otherwise use
this section.
**************************************************************************
**************************************************************************
NOTE: On the drawings, show:
1.
Roof slope
SECTION 07611N
Page 3