recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)
AAMA 501
(1994) Methods of Test for Exterior Walls
AMERICAN ASSOCIATION OF STATE HIGHWAY AND TRANSPORTATION OFFICIALS
(AASHTO)
AASHTO T 259
(2002) Resistance of Concrete to Chloride
Ion Penetration
AASHTO T 260
(1997; R 2001) Sampling and Testing for
Chloride Ion in Concrete and Concrete Raw
Materials
ASTM INTERNATIONAL (ASTM)
ASTM C 140
(2003) Sampling and Testing Concrete
Masonry Units and Related Units
ASTM C 642
(1997) Density, Absorption, and Voids in
ASTM C 672
(1992) Scaling Resistance of Concrete
Surfaces Exposed to Deicing Chemicals
ASTM D 1653
(2003) Water Vapor Transmission of Organic
Coating Films
ASTM D 2369
(2004) Volatile Content of Coatings
ASTM D 3278
(1996e1; R 2004) Flash Point of Liquids
by Small Scale Closed-Cup Apparatus
ASTM E 514
(2004) Water Penetration and Leakage
Through Masonry
ASTM E 96
(2000e1) Water Vapor Transmission of
Materials
ASTM G 53
(1996) Operating Light- and Water-Exposure
Apparatus (Fluorescent UV-Condensation
Type) for Exposure of Nonmetallic Materials
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
29 CFR 1910.1000
Air Contaminants
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
SECTION 07190
Page 4
Previous Page
