for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Fabrication and Placement[; G][; G, [_____]]
The Contractor shall submit shop drawings which include:
reinforcement steel placement drawings; reinforcement steel
schedules showing quantity, size, shape, dimensions, weight per
meter foot, total weights and bending details; and details of bar
supports showing types, sizes, spacing and sequence.
SD-03 Product Data
Butt-Splices[; G][; G, [_____]]
The Contractor shall submit the proposed procedure for
butt-splicing steel bars prior to making the test butt-splices for
qualification of the procedure. Properties and analyses of steel
bars and splicing materials shall be included in the submitted
procedure. Physical properties of splicing sleeves shall include
SECTION 03201
Page 7
Previous Page
