the project drawings:
1. Clearly indicate all areas to be turfed and if
more than one type of turf is specified, delineate
areas for each type.
2. All draft turf specifications shall be submitted
to the cognizant Landscape Architect/Natural
Resources Specialist for review to ensure that the
specifications are in accordance with environmental
conditions peculiar to the project areas.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM C 602
(1995a; R 2001) Agricultural Liming
Materials
ASTM D 4427
(1992; R 2002e1) Peat Samples by
Laboratory Testing
ASTM D 4972
(2001) pH of Soils
TURFGRASS PRODUCERS INTERNATIONAL (TPI)
TPI GSS
(1995) Guideline Specifications to
Turfgrass Sodding
U.S. DEPARTMENT OF AGRICULTURE (USDA)
AMS Seed Act
(1940; R 1988; R 1998) Federal Seed Act
DOA SSIR 42
(1996) Soil Survey Investigation Report
No. 42, Soil Survey Laboratory Methods
Manual, Version 3.0
1.2
DEFINITIONS
1.2.1
Stand of Turf
95 percent ground cover of the established species.
SECTION 02923
Page 4
Previous Page
