project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM C 602
(1995a; R 2001) Agricultural Liming
Materials
ASTM D 4427
(1992; R 2002e1) Peat Samples by
Laboratory Testing
ASTM D 4972
(2001) pH of Soils
U.S. DEPARTMENT OF AGRICULTURE (USDA)
AMS Seed Act
(1940; R 1988; R 1998) Federal Seed Act
DOA SSIR 42
(1996) Soil Survey Investigation Report
No. 42, Soil Survey Laboratory Methods
Manual, Version 3.0
1.2
DEFINITIONS
1.2.1
Stand of [Turf][_____]
95 percent ground cover of the established species.
1.3
RELATED REQUIREMENTS
[Section 02300 EARTHWORK], [Section 02811 IRRIGATION SPRINKLER SYSTEMS],
[Section 02915 TRANSPLANTING EXTERIOR PLANTS], [Section 02922 SODDING],
[Section 02923 SPRIGGING], [Section 02930 EXTERIOR PLANTS], and Section
02935 LANDSCAPE ESTABLISHMENT applies to this section for pesticide use and
plant establishment requirements, with additions and modifications herein.
1.4
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
SECTION 02921
Page 4
Previous Page
