ASME INTERNATIONAL (ASME)
ASME B18.22.1
(1965; R 2003) Plain Washers
ASME B18.22M
(1981; R 2000) Metric Plain Washers
ASTM INTERNATIONAL (ASTM)
ASTM A 479/A 479M
(2004) Stainless Steel Bars and Shapes for
Use in Boilers and Other Pressure Vessels
ASTM D 1171
(1999) Rubber Deterioration - Surface
Ozone Cracking Outdoors or Chamber
(Triangular Specimens)
ASTM D 2000
(2003ae1) Rubber Products in Automotive
Applications
ASTM D 395
(2003) Rubber Property - Compression Set
ASTM D 412
(1998a; R 2002e1) Vulcanized Rubber and
Thermoplastic Elastomers - Tension
ASTM D 471
(1998e1) Rubber Property - Effect of
Liquids
ASTM D 573
(2004) Rubber - Deterioration in an Air
Oven
ASTM D 575
(1991; R 2001) Rubber Properties in
Compression
ASTM D 624
(2000e1) Tear Strength of Conventional
Vulcanized Rubber and Thermoplastic
Elastomers
ASTM D 746
(2004) Brittleness Temperature of Plastics
and Elastomers by Impact
ASTM F 593
(2002e2) Stainless Steel Bolts, Hex Cap
Screws, and Studs
ASTM F 594
(2002) Stainless Steel Nuts
U.S. DEPARTMENT OF DEFENSE (DOD)
MIL-PRF-907
(Rev E; Am 2) Antiseize Thread Compound,
High Temperature
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
SECTION 02397
Page 3
Previous Page
