**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM D 4354
(1999) Sampling of Geosynthetics for
Testing
ASTM D 4355
(2002) Deterioration of Geotextiles from
Exposure to Light, Moisture and Heat in a
Xenon-Arc Type Apparatus
ASTM D 4491
(1999a) Water Permeability of Geotextiles
by Permittivity
ASTM D 4533
(1991; R 1996) Trapezoid Tearing Strength
of Geotextiles
ASTM D 4632
(1991; R 2003) Grab Breaking Load and
Elongation of Geotextiles
ASTM D 4751
(1999a) Determining Apparent Opening Size
of a Geotextile
ASTM D 4759
(2002) Determining the Specification
Conformance of Geosynthetics
ASTM D 4833
(2000e1) Index Puncture Resistance of
Geotextiles, Geomembranes, and Related
Products
ASTM D 4873
(2002) Identification, Storage, and
Handling of Geosynthetic Rolls and Samples
1.2
MEASUREMENT
**************************************************************************
NOTE: Delete paragraphs MEASUREMENT and PAYMENT
when lump sum bidding is used.
**************************************************************************
Measurement shall be made of the as-built surface area in square meters
yards covered by geotextile. Allowance will be made for geotextile in
anchor and/or drainage trenches but no allowance will be made for waste,
overlaps, damaged materials, repairs, or materials used for the convenience
of the Contractor.
1.3
PAYMENT
Geotextile installed and accepted will be paid for at the respective
contract unit price in the bidding schedule. This unit price shall include
the cost of materials, equipment, installation, testing, and other costs
associated with placement of the geotextile.
SECTION 02373
Page 4
Previous Page
