ITEM
DESCIPTION
EST
U/M
UNIT
AMOUNT
QTY
PRICE
__________________________________________________________________
0001 480-VOLT, 3-PHASE, UNIT
1
LS
EACH
$__________
MOTOR CONTROL CENTER
(NO. _____)
000X 480-VOLT, 3-PHASE, MOTOR
1
LS
EACH
$__________
CONTROL CENTER
(NO. _____)
000X 480-VOLT, 3 PHASE, POWER
1
LS
EACH
$__________
DISTRIBUTION SWITCHBOARD
(NO. _____)
000X 480-VOLT, 3-PHASE, POWER
1
LS
EACH
$__________
(NO. _____)
000X ACCESSORIES AND SPARE
1
LOT
XXXX
$__________
PARTS
000X CONTRACT DATA (PART 1,
XXX
XXX
NSP
XXXXXXXXXXX
THE SCHEDULE) (SEE
DD FORM 1423, EXHIBIT B)
**************************************************************************
These specifications include the design, fabrication, assembly, wiring,
testing, and delivery of the items of equipment and accessories and spare
parts listed in the Schedule and shown on the drawings.
1.2.1
Rules
**************************************************************************
NOTE: Many manufacturers represent IEC ratings as
equivalent to NEMA ratings or UL labeling. The two
are different standards philosophies and are not
interchangeable. IEC ratings are not acceptable
under this specification. For further information,
see NEMA ICS 2.4, "NEMA AND IEC DEVICES FOR MOTOR
SERVICE - A GUIDE FOR UNDERSTANDING THE DIFFERENCE."
**************************************************************************
The equipment shall conform to the requirements of NFPA 70 unless more
stringent requirements are indicated herein or shown. NEMA rated and UL
listed equipment has been specified when available. Equipment must meet
NEMA and UL construction and rating requirements as specified. No
equivalent will be acceptable. The contractor shall immediately notify the
Contracting Officer of any requirements of the specifications or contractor
proposed materials or assemblies that do not comply with UL or NEMA.
International Electrotechnical Commission (IEC) rated equipment will not be
considered an acceptable alternative to specified NEMA ratings.
1.2.2
Coordination
**************************************************************************
NOTE: Combination motor controllers, using motor
SECTION 16403A
Page 8