interior of single wythe exterior walls. Metal and
gypsum lath will be included as Contractor's options
except that gypsum lath will be deleted where
portland-cement plaster is specified exclusively.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM A 580/A 580M
(1998; R 2004) Stainless Steel Wire
ASTM A 853
(2004) Steel Wire, Carbon, for General Use
ASTM B 164
(2003) Nickel-Copper Alloy Rod, Bar, and
Wire
ASTM C 1002
(2004) Steel Self-Piercing Tapping Screws
for the Application of Gypsum Panel
Products or Metal Plaster Bases to Wood
Studs or Steel Studs
ASTM C 1032
(2004) Woven Wire Plaster Base
ASTM C 150
(2004a) Portland Cement
ASTM C 206
(2003) Finishing Hydrated Lime
ASTM C 28/C 28M
(2000el) Gypsum Plasters
ASTM C 29/C 29M
(1997; R 2003) Bulk Density ("Unit
Weight") and Voids in Aggregate
ASTM C 35
(2001) Inorganic Aggregates for Use in
Gypsum Plaster
ASTM C 37/C 37M
(2001e1) Gypsum Lath
ASTM C 472
(1999; R 2004) Physical Testing of Gypsum,
Gypsum Plasters and Gypsum Concrete
ASTM C 587
(2002) Gypsum Veneer Plaster
ASTM C 588/C 588M
(2003e1) Gypsum Base for Veneer Plasters
ASTM C 61/C 61M
(2000) Gypsum Keene's Cement
SECTION 09200A
Page 5